| |
3 channel IR remote control
This project is a 3-channel IR remote control with 3 output
relay and easy to build.
---48
A simple Remote control Tester
Here is a handy gadget for test- ing of infrared (IR) based re- mote control transmitters used for TVs and VCRs etc. The IR signals from a remote control transmitter are sensed by the IR sensor module in the tester and its output at pin 2 goes low. T
---858
High-Powered, 4-Bit, Infrared Remote Control
Add 4-Bit Infrared Remote Control to your next 8051 project
---337
Infa-Red Remote Control
This remote transmits a tone using an infa-red LED.
---291
Infra Red Remote Control Extender
This circuit is used to relay signals from an Infra Red remote control in one room to an IR controlled appliance in another room.
---445
IR Link
This is a battery powered IR Link which may be used in more than one room. The standby current is extremely low - giving a good battery life; and by shutting down in the presence of extraneous IR radiation it copes with the problem of excessive outpu
---447
IR Remote Control
Volume and mute are provided by this simple but functional circuit. Suitable for all preamps
---270
Programmable IR remote control
NEC-SIRCS-JAPAN-RC5-SAMSUNG compatible, multiprotocol infrared remote control.
---35
Remote Control Encoder/Decoder IC\'s With PicBasic Pro
All you need is the PicBasic Pro compiler, a couple of PIC16F628 microcontrollers, and a few simple support components.
---64
|
|
|
