|
|
| |
Home » Categories » Microcontroller and Micro processor » PIC Microcontroller (ICD2 clone,Digital clock,RTC interfacing...)
« 1 2 3 |
| |
|
| |
|
|
|
| |
a nice PIC programmer
Easy to build PIC programmer interface with PC parallel port.
---297
a small ICD2 clone
This is the small ICD2 clone. It has less than credit card size on a single side PCB and no external power require communicate with PC via RS232 port.
---32
Airplane simulator interface cable
This is a R/C simulator interface cable(some time called Serial PIC interface) .It use for interface to simulator software such FMS ,AFDP(require PPJoy)etc. This project interface vai COM port (RS-232 )
---888
Build Your Own uWebserver
uWebserver is a very lowcost webserver based on a PIC16c84 microcontroller and the Seiko S7600 internet protocol stack. A very good example on how to write server applications using the S7600.
---345
Byron Jeff\'s PIC Programmer
This is a schematic for a trivial Tait style programmer that does low voltage programming (LVP). With a single IC and a single resistor
---305
Classic PIC Programmer
Classic PIC Programmer adapted from originally by David Tait.
---299
Controls a stepper motor using a PIC16F84
Controls a stepper motor using a PIC16F84. More of a learning project for myself, on how to use / control a stepper motor
---969
Digital Thermometers (PIC)
Digital Thermometers in this circuit design from microcontroller PIC16F628 of micrichip company.Good point of PIC16F628 such as brown-out reset , low-voltage programming reference voltafe module,USART: Universal Synchronous Asynchronous Receiver Tran
---885
Easy Debugging Terminal
Build a simple 9600 BAUD 8n1 LCD terminal for debugging and testing the projects having RS232C output.
---522
F84 Miniature Real-Time Controller
Build a simple real-time controller with PIC16F84 running at low power X-tal 32,768Hz. Daily scheduler for 6-channel resided in 64-byte EEPROM can easily be preprogrammed using Nigel PicProg.
---524
F84-Programmer
Build a low-cost and very simple serial programmer for a PIC16F84 Microchip Flash Microcontroller. Below picture is my personal writer for F84 chip, it works very nice with Nigel WPicProg V1.20.
---523
FMS Serial PIC interface
Build your own FMS Serial PIC interface
---808
ICD2 Clone
This is a MPLAB compatible clone of Microchip\'s in circuit debugger ICD2 which allows to program and debug PIC
---33
In-Circuit PIC Loader
This loader connects the PC printer port and works with WinPic800. The loader gets DC supply from application board and provides +12V for high voltage programming mode. We can use it for programming many PIC chips easily.
---896
In-Circuit-Debugger for MPLAB-6 (ICD2)
This is an In-Circuit-Debugger compatible to Microchip\'s new MPLAB-6 IDE (ICD2).
---34
|
|
|
|
| |
|
