ARobot Light Detector
This application explains how to make a light detector for ARobot. This can be used to tell when a light is on or off, whether the robot is inside or outside, or for light following. This is a simple expansion and does not require soldering if using a breadboard. It does assume that you have attached a breadboard and an expansion cable to the ARobot (see the breadboard/perfboard application note). This circuit and the light sensor could be mounted and soldered to a perf board and located to a movable head.
| ARobot Light Detector More detail on ARobot Light Detector website www.arrickrobotics.com |
||
Posted in :
robot projects
