 |
|
|
 | |
 |
|
 |
|
| dual usb charger | |
| Automatic fan controller circuit |
| This circuit will turn on/off 12V DC fan or CPU fan when temperature above normal temperature.You can set turn on temperature by adjust VR1. This circuit use an NTC (Negative temperature coefficient)which is a thermistor is one in which the zero-power resistance decreases with an increase in temperature. So If temperature increate the voltage at pin 3 on LM311 will decreated .The resistance of NTC is about 10K at 25'c. VR1 should be multi-turn potentiometer type such 10K/25 turn  circuit TTC3A103 data sheet Data sheet in jpeg file format. 2N3904 data sheet Data sheet in pdf file format. This is a 2N3904 from Philips semiconductors. |
|
© 2005-2011 by www.coolcircuit.com . All rights reserved. Licensed under a Creative Commons Attribution 3.0 License. Privacy |