PIC16C63 Midi controlled Light dimmer
This is a MIDI box interface. There’s an input connector and an output connector. The boxes’ output connector goes downstream to the next boxes’ input connector. There’s a DIP switch in each box to select which of the 16 channels the box will respond to, and what device the first light will respond to. The four lights and the relay will respond to four consecutive device addresses.This design can be modified to use standard baud rates, and the RS-232 Electrical interface. Then you can just fire off commands via RS-232. Cakewalk would be a little difficult to interface to if you just wanted to make a home lighting system that responds to opening doors and time of day. For that you just wip something up in Visual basic using standard com port commands.
| PIC16C63 Midi controlled Light dimmer at www.mindspring.com |
||
