Table Saw vs Miter Saw

Some of the most common power tools you’d find in a severe woodworker’s shop are the mitre saw and the table saw along with other equipment like drills and circular saws. One may ask about the difference between the table saw, and the mitre saw. They have different functions and features which is why some people buy both. Is it worth the comparison? What are the uses for each machine? If you’d have to pick one, which one should you get?

Let’s say you have a particular project and you need one machine that could fulfil your needs. It’s important to understand which power tool possess the features you need to accomplish the job. Let’s have a run on both devices and their specs.


The Table Saw & It’s Uses

It is considered as the heart of the woodworker’s shop as it is perhaps the essential tool there is. You are sure always to find one of these wherever in woodworking shops. It can genuinely handle long continuous hours of work, and it’s cutting prowess make it a must-have. Crosscuts, ripping, and mitres are just some of its capabilities. It’s arguable that the table saws are versatile compared to the mitre saw. There are some panelings as long as the 4” x 8” also add to the list of the table saw’s achievements. However, the table saw has its limits. Due to the nature of its function, it can only cut a straight line. It is why cutting machines like the mitre saw exist.

The uses of table saws keep coming because it’s also accessible for polishing timber aside from home improvement. Continuous development of these power tools had led to the increase of accuracy and strength. Table saws equipped with other accessories like sliding supports to make the job easier. Any do-it-yourselfer would appreciate that it is easy to use. Remodelers and contractors are also seeing the benefits of using this powerful tool.

The Rundown on Miter Saws

Mitre saws are stationary and don’t have any other tools to hold them up, but some may have arm extensions. The mitre saw has two different kinds: the standard mitre saw, and the compound mitre saw. Whatever the kind of mitre saw, you should be able to do two different types of cuts, from the basic ones on a wood plank to cuts that are angled. The latter type of cut is done by adjusting the blade and guiding the wood over it, pulling the blade downward. Other cuts can be down with the more advanced mitre saw. Compound mitres make us of bevels to lock at the certain angle that you need to cut. There are advanced mitre saws that allow you to position the blade in different directions.

There are a few cutting styles that mitres saws are capable of compared to table saws. Apart from the mentioned about, they can also do combination cuts.Because they come in different settings, woodworkers can enjoy the available features for different types of jobs. When you’re looking to do crown moulding, bevel cuts are the best choice. They retained the square cuts and angled cute get fitted when making angle cuts. One thing about mitre saw is that ripping cannot be made complete. Guiding the wood to this tool is not possible unlike the table saw. It’s the blades that do the work to produce precision measure cuts. The handles of the machine are shifted to create your preferred bevel cuts before the edge touches the surface.


The Conclusion

The best decision is to buy both types of equipment if you have the budget for both the table saw, and the mitre saw. These power tools are needed if you are to accomplish different types of projects that the other one cannot complete.

If you only need one, you should be looking at the type of project that you want to accomplish, its cutting capabilities and the area of work that you have. While most people who do woodworking may pick the table saw for its versatility, mitre cuts can still compare to what the other can do.

If you think that angled cuts, as well as bevel cuts, will rule your project, the mitre saw is the obvious choice. Whether you’re buying just one of these tools, you can rest assured that both are heavy-duty and reliable.